G r o u p c a l l s
42
When you turn the group selector, the group name appears on the
display, and if voice feedback is activated, the radio plays the index
number of the current group.
To switch between the last two selected groups (excluding the home
group), press the back key. To select the home group, press and
hold the back key.
Or, you can select a group by pressing
in the idle mode and
selecting the desired group from the list of talk groups. Wait until
is displayed and the radio plays a short tone.
You may be able to select groups also via number key shortcuts.
This is useful for example when the radio is in the car kit holder and
the group selector cannot be used. For more information, contact
your organisation.
Note that if you change your selected group, you cannot receive
calls from the group that used to be your selected group unless the
group is included in scanning.
Scanning settings
1. Select
2. To switch scanning on, scroll to
, and press
. To switch
, and press
You can also quickly activate and deactivate scanning in the fast
menu. See Fast menu on page 36.
is displayed when scanning
is on.
To set the groups you want to scan, press
in the idle mode to
access the list of talk groups in the selected folder. Scroll to the
desired group, and select
scanning, or
to exclude the group from scanning. You can
also set scanned groups in the menu. See Edit group folders on
page 46.
THR880i_Rel6_en_print.book Page 42 Jeudi, 20. novembre 2008 2:13 14
