manualshive.com logo in svg

TANDBERG Voyager E5784, Справочное руководство, Страница: 368 / 384

Поделиться
Скачать
TANDBERG Voyager E5784 Скачать руководство пользователя страница 368

  

Setting of the Remux Card for Data/PSIP and DVB-Subtitles Input 

Page J-6 

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder 

 

ST.RE.E10137.3 

J.4.2 The 

Setting 

Sequence 

1.  Identify which Remux card input will supply the PSIP elementary 

streams. 

2.  For the selected input, change Remux input # in mode to Off. 
3.  Change the value of SI Level to Off. 
4.  Configure the values of PSIP Min PID and PSIP Max PID to include 

all the externally supplied PMT, EIT tables and elementary streams. 

5.  Change the value of Remux input # in mode to PSIP. 
6.  Finally, change the value of SI Level to On (Ext.PSIP) or 

Off (Ext.PSIP/PSI) according to Table J.2. 

 

J.4.3 

The Setting Sequence when an Encoder is Upgraded 

from an Earlier Build Version 

If the Encoder was running a version prior to V3.8.0 and was already setup 

to source PSIP via the Remux card, it is necessary to make some minor 

adjustments once the software upgrade is complete. 
The entry Ext. PSIP Source has been substituted by the three entries 

Remux input # in mode. All that is required is to set the appropriate 

input in the menu.  

NOTE… 
If the Encoder is not behaving as expected, a complete re-setup can be done by following the 

sequence in Para J.4.1. 

Содержание Voyager E5784

































































































































































































































































































































































































Отзывы:

Нет отзывов