background image

3

 

Mounting the bottom module to the foot module to establish the base.

MOUNTING THE BASE: 

1. 

Remove the four nuts at the foot 
module

2. 

Grab the bottom module and lift it 
up to place the bottom module on 
the foot plate

3. 

When looking down through the 
bottom module you can see the 
four screws at the foot module

4. 

Make sure these screws hits the 
corresponding holes underneath 
the bottom module.

5. 

Fasten the four nuts as described 
and illustrated to the right.

PERSON 1: Grab and lift here

PERSON 2: Grab 
and lift here

The illustration shows the standalone foot module. 
The wall mounting foot module is mounted in the 
same way.

PRECAUTIONS

Please follow the steps in this installation guide when unpacking and 
assembling the TANDBERG T1.

A minimum of four (4) people are required during the installation of the 
TANDBERG T1. 

s

The monitor box requires four (4) people to lift

s

The bottom module requires two (2) people to lift

Weights of the different units (package included):

s

Monitor box: 110 kg / 243 lbs

s

Bottom module: 40 kg / 88 lbs

s

Foot module box: 25 kg / 55 lbs

s

Acces grille boxes: 7 kg / 15 lbs

UNPACKING THE SYSTEM AT THE DESTINATION

It is highly recommended to start unpacking and assembling of the 
TANDBERG T1 at the place where the TANDBERG T1 is to be used. 

Check the dimensions of the lift if you need to use a lift for the transportation. 
Outer dimensions and total weight of the main unit (package included):

s

Height: 145cm/57.1in 

s

Width: 76cm/29.9in

s

Length: 170cm/66.9in

s

Weight: 182kg/401lbs

NOTE!

 If it is not possible to bring the main unit to the destination, follow 

step 1–2 and bring the smaller units to the destination. 

NOTE!

 The floor must be in level.

ROOM GUIDELINES

Room guidelines are described in the T1 Administrator Guide.

USER DOCUMENTATION

The user documentation for TANDBERG products is available on the 
TANDBERG web site: http://www.tandberg.com/docs

DIMENSIONS

The unit has the following dimensions:

s

Height: 167cm/65.7in

s

Width: 153cm/60.3in

s

Depth: Floor stand: 66cm/26in 
           Wall mount, with short bracket: 44.7cm/17.6in 
           Wall mount, with long bracket: 52.2cm/20.6in

TANDBERG T1 is delivered with:

Monitor box
Bottom module
Foot module box (standalone/wall mount)
Grille box
TANDBERG PrecisionHD 1080p camera
Accessories box

s

Microphones, 3 pcs.

s

Remote Control (including 4 AAA batteries)

s

Spanner, 13 mm

s

Gloves, 3 pairs

s

TANDBERG Cloth

Installing the TANDBERG T1

www.tandberg.com

Unpacking and assemble the TANDBERG T1

1

 

Unpacking the foot module and the power cable

FOOT MODULE (25kg/55lbs)

1. 

Open the snap lockers

2. 

Lift out the foot module box

117098.03 MAY 2009

POWER CABLE
The power cable is found 
to the left of the foot 
module box in the front.

MONITOR BOX  
(110kg/243lbs)

2

 

Unpacking the unit.

CAUTION

HEAVY

AND

BULKY

REQUIRES:

4 PEOPLE TO 

LIFT

CAUTION

HEAVY

AND

BULKY

REQUIRES:

2 PEOPLE TO 

LIFT

STANDALONE FOOT

WALL MOUNTING 
FOOT

ACCESSORIES TO THE FOOT MODULE

s

Allen key

s

Orange wrench for levelling adjustment

s

Wall brackets (wall mounting only)

s

Spacer (wall mounting only)

s

Screws and bolts

Front side

Front side

Page 1

BOTTOM MODULE  
(40kg/88lbs)

Lift out to open 

the snap lockers

4

7

    ghi

    pqrs

6

#

abc/123

9

1

    

.

@

5

0

8

    jkl

    tuv

    abc

3

    def

    mno

    wxyz

ACCESSORIES BOX
Wrench, key lock tool, screws, gloves, 
microphones, remote control and 
TANDBERG cloth.

The illustration shows 
a cross section of the 
base (bottom module 
and foot module)

Fasten the 2 nuts 
from the outside

Fasten the 2 nuts 
from the outside

Outer cover

Camera box

Grille box

Accessories box

Foam for protection 
of bottom module

Bottom module

Monitor box

1. 

Place the unit on a stable surface.

2. 

Open the snap lockers to remove 
outer cover.

3. 

Locate the different parts. 

4. 

Lift out the grille box, accessories 
box and the camera box. 

5. 

Remove the packaging above and 
around the bottom module and 
monitor box.

Lift out to open 

the snap lockers

4

 

Key lock and levelling adjustment

KEY LOCK
Place the orange key on the key 
lock and turn clock-wise to lock, 
counter clock-wise to unlock

LEVELLING ADJUSTMENT
Place the orange wrench on the foot 
wheel (under the foot plate) and pull 
to adjust up. Use the opposite side 
of the tool to adjust down.

Lock

 

     Unlock

The height adjustment tool is found in 
the foot module box. The key lock tool 
is found in the accessories box.

Отзывы: