TANDBERG SM6610, Справочное руководство

Страница: 163 / 200

File Transfer Protocol (FTP)
Reference Guide: SM6610, SM6615, SM6620 and SM6625 Satellite Modulators Page 9-3
ST.RE.E10152.2
9.1 File Transfer Protocol (FTP)
9.1.1 Introduction
CAUTION…
Only one logical control interface on the Modulator, i.e. Front Panel, Terminal, SNMP Remote Control,
FTP, etc, should be used at any one time. Using more than one interface simultaneously may cause
unexpected behaviour of the Modulator.
The SM66XX Satellite Modulators provide a File Transfer Protocol (FTP)
interface which is primarily used for code and firmware updates. It is also
used for retrieving logs and configurations as well as uploading
configurations.
Any FTP program may be used to access the Modulator’s FTP server.
However, it should be noted that the Modulator will only allow one logon at
a time and many graphical FTP clients use multiple logons. The sample
screens given in this chapter were obtained using the FTP client shipped
with Microsoft Windows.
NOTE…
The Modulator uses a reduced instruction set of standard FTP commands.
9.1.2 FTP Interface
To FTP to the Modulator, FTP Logon privilege is required. A typical logon
screen is as follows:
C:\>ftp 192.168.55.3
Connected to 192.168.55.3.
220 TANDBERG Satellite Modulator SM6600
User (192.168.55.3:(none)): root
331 Password required for user root.
Password:
230-Modulator identity:
230-DEV001
230 User logged in.
ftp>
When logged on, the Modulator returns its identity which can be set from
the terminal interface described in Chapter 3, Operating the Equipment
Locally.
The FTP server responds to the normal
dir
and
ls
commands. The
top-level directory is as follows: