22
D14049.03
MAY 2008
Grey Headline
(continued)
Web Interface
General page features
These are the features that can be found on
some or all of the web UI pages.
Log out
This icon appears on the top right corner
of every page. Clicking on this icon will end
your Administrator session. You will be taken
to the Administrator Login page.
View manual
This icon appears on the top right corner
of every page. Clicking on this icon will take
you directly to the latest version of the VCS
Administrator Guide on the TANDBERG website.
Information
This icon appears to the right of most
input fields in the web interface.
Clicking on this icon will activate the
Information Box
.
Page name and Location
Every page shows the page name and the menu path that you took to get there. Each part of the
menu path is a link; clicking on any of the higher level menu items will take you to that page.
System Warning
This icon appears on the top right corner
of every page when there is a system warning
in place. Clicking on this icon will take you
to the Warning page which will provide you
with information about the warning and its
suggested resolution.
Information box
A yellow information box will appear on the
configuration pages whenever you either click
on the
Information
icon or click inside a field.
This box gives you information about the
particular field, including where applicable the
valid ranges and default value.
To close the information box, click on the
X
at
its top right corner.
System Information
Each page will always show the system name
(or LAN 1 IPv4 address if no system name is
configured) at the bottom left corner, and the
hardware serial number and VCS software
version at the bottom right corner.
Sorting Columns
Click on column headings to sort the
information in ascending and descending order.
Select All
and
Unselect All
Use these buttons to select and unselect all
items in the list.
Status
On configuration pages, this section shows
you the current status of the items you are
configuring.
Note that some configuration requires a reboot
to take effect, so if you have changed the
configuration but not yet rebooted this will
show the existing (unchanged) status.
Information bar
The VCS provides you with feedback in
certain situations, for example when settings
have been saved or when you need to take
further action. This feedback is given in a
yellow information bar along the top of the
page.
TANDBERG
VIDEO COMMUNICATIONS SERVER
ADMINISTRATOR GUIDE
System Administrator Access
