22
D13898.05
DECEMBER 2007
TANDBERG
CONTENT SERVER
ADMINISTRATOR GUIDE
Basic H.323 Services Setup via Content Server Interface—Step 3
About Basic H.323 Services
A quick basic setup of your TANDBERG Content
Server includes:
Setting up H.323 services via the Content
1.
Server interface (described two pages
back).
Making a test call recording (described on
2.
the previous page).
Changing the administrator password and
3.
setting up server date and time on the
Windows Server.
Once the initial setup has been completed (previous page),
log in to the Web User Interface for Microsoft Windows Server
administration,
https://<ContentServerIPaddress>:8098/
, using
Internet Explorer and use the
Set Administrative Password
tool to
change your administrative password.
Go to
Maintenance
>
Date/Time
to update Date and Time settings
on the server.
Web Server Setup
To read more on how to set the
administrative properties and user
configuration, see the
You may wish to record your new
administrative password in a safe
location. Please note that you should
not change the default administrator
account name.
Recommended Next Steps
Register your Content Server using the Registration Card or via the web
1.
at
Apply the most recent
2.
for the Content Server
Decide what your Content Server settings will be in the following areas:
3.
:
Use Local machine users, or
a.
use LDAP/Active Directory users and groups (recommended).
b.
Manual dial or
•
:
Use in stand-alone mode with ad hoc dialing
a.
Use with TMS 11.8 for scheduled calls.
b.
Review
•
Optional – configure special case streaming resources:
•
Configure your servers for multicast streaming in Media Servers.
a.
Configure external streaming servers in Media Servers
b.
Optional – add new
•
Configure
•
Review
•
used by the Content Server and adjust your firewall
settings if required.
Remember to restart the Content
Server every time you change date,
time and time zone information.
