![TANDBERG RX8310 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/tandberg/rx8310/rx8310_user-manual_3501931007.webp)
RX8310/RX8315/RX8330 Distribution Receiver
7
2
Installing the Equipment
2.1 Introduction
Use this User Guide for guidance on installation and operation. Only use
installation accessories recommended by the manufacturers.
2.2 Operating
Voltage
CAUTION
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your business, consult a qualified electrical engineer or your
local power company.
AC Models
AC
models are fitted with a wide-ranging power supply. It is suitable for supply
voltages of 100-240 V ac -10% +6% at 50/60 Hz nominal.
2.3
Power Cable and Earthing
Check that the power cable is suitable for the country in which the Receiver is to
be used.
WARNINGS
1.
The Technical Earth is not a protective earth for electric
shock protection.
2.
This unit must be correctly earthed through the moulded
plug supplied. If the local mains supply does not have an
earth conductor do not connect the unit. Before connecting
the unit to the supply, check the supply requirements.
Contact Customer Services for advice.
2.4
Rear Panel Connectors
Always use the specified cables supplied for signal integrity and compliance with
EMC requirements (see
Reference Guide
).