Quick Guide to using the Tandberg remote
Page 1
v1.1r
Picking up the remote by the sides or pressing any button will take the Video Conferencing
Unit (VCU) out of 'standby'. With the unit connected to the network, you're now ready to go!
Figure 1 - Tandberg remote control functions
.
Home
Displays the Main
Menu with Call,
Presentation,
Camera Control and
Settings options
Clear
This button will
remove one
character per
press (to delete an
incorrect entry)
Layout
This button
presents options
for switching the
layout of images
displayed
Function keys
These will
correspond to
function buttons
shown on-screen
Numerical keypad
Use this to enter digits
(e.g. when entering an
E.164 number or an IP
address). Just start
entering the number when
the VCU is out of standby
mode
Phonebook
Press this button to
open the VCU's
Phonebook
Call
Select a Phonebook
entry or enter an E.164
no. or IP address then
press 'Call' to initiate
the call.
This button also
answers an in-coming
call
End Call
This button will end an
active call on the VCU.
When held down, it will put
VCU into standby
'Directional controls' and
'Confirm'
are used to move
through menu options.
step forward or back
through menu options or
control the HD camera.
The '
' button selects the
currently highlighted choice
Volume
+/-
Mute
the microphone
HD Camera
Zoom
+/-
Presentation
Will add a laptop/desktop computer's output
to the conference call when connected to
the VCU
Microphone
Remember to place the
attached conference
microphone (above) close
to all local participants
