Copyright © TANDBERG 2008
Reference Guide Version 3.0 rev 3.0
43
8
Deprecated messages
These messages were supported in version 1.0 of the MCU 4200 Series Management API, but have since been
superseded.
8.1
system.query
This method is deprecated in favour of “device.query” and “conference.enumerate”.
There are no parameters passed with this method call. The method response returns the following:
Parameter
Type
Comments
currentTime dateTime.iso8601
The system’s current time.
restartTime
dateTime.iso8601
The date and time at which the system was last restarted.
The method also returns a ‘conferences’ <array> of <struct> for each conference, where each <struct>
contains the following parameters:
Parameter
Type
Comments
conferenceName
String
The name of the conference
numJoined
Integer
The number of participants that have ever joined the
conference.
numLeft
Integer
The number of participants that have ever left the
conference. The difference between numJoined and
numLeft gives the number of current participants.
Note that until conference.destroy is called for a particular conference, the conference will remain in the list of
conferences even after the conference has ended.
8.2
conference.query
This method is deprecated in favour of “conference.enumerate” and “participant.enumerate”.
Parameter
Type
Comments
conferenceName
String
The name of the conference of interest.
The method response returns the following:
Parameter
Type
Comments
startTime
dateTime.iso8601
The time at which the conference started at or will start
at.
endTime
dateTime.iso8601
The time at which the conference will end. If the
conference is permanent then this parameter is absent.
pin String The
PIN.
The method also returns a ‘participants’ <array> of <struct> for each conference, where each <struct>
contains the following parameters:
Response
Type
Comments
participantName
String
The participant name supplied in the participant.add
message.