TANDBERG FS-L4201C, Руководство пользователя

Страница: 2 / 11

Parts 3
Connection to Signal Source 4
Out Drawing of product 6
Name and Function 7
Power Management Feature 8
Adjusting OSD 10
Standard Signal Table 12
Pin assignment table of signal connector 13
Specification 15
Troubleshooting 16
Warning 18
INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy and,if not installed and used in accor-
dance with the instructions, may cause harmful interference to radio commu-
nications.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to crrent the interference by one or more
of the fllowing measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment
Table of Contents