#1019372A#
RDX QuikStation
North American Region Power Cord
European Region Power Cord
Ethernet Cables (2 each)
End Cap Covers
USB Flash Drive
Rail Extension Brackets (2 each)
Washers for Rackmount Kit (8 each)
Hardware Pack for Inner Rails
Hardware Pack for Outer Rails
Rackmount Outer Rails (2 each)
Rackmount Inner Rails (2 each)
Quick Start Guide
Rackmount Instructions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
USB
4
10
9
11
12
7
5
13
14
6
8
©2010 Tandberg Data. All rights reserved. RDX QuikStation is a trademark of Tandberg
Data. RDX is a registered trademark of ProStor Systems, Inc. All other trademarks are the
property of their respective owners.
P/N 1019372 Rev. A
November 2010
Tandberg Data Gmbh
Feldstrasse 81
44141 Dortmund, Germany
Agency Model Number: RMN-A-05-10
AC Input Voltage
100-240 VAC
Rated Input Current
2,0 - 1,0A
Rated Input Frequency 50/60 Hz
Power Ratings
Safety Precautions
Be aware of the locations of the power on/off switch on the RDX QuikStation chassis as well as the room’s
emergency power-off switch, disconnection switch, or electrical outlet. If an electrical accident occurs, you can then
quickly remove power from the system.
The RDX QuikStation is intended for use when mounted in a standard rack. It may be used on a shelf or table top,
but proper care should be taken to keep the area around the unit free of clutter to ensure proper ventilation.
The interior of the unit is intended for factory use only. Other than replacing fans or RDX cartridges, users should not
attempt to service the unit. In the event that one of the fans is removed for servicing, do not insert hands, fingers, or
any foreign object into the space intended for the fan. Be extra cautious around spinning fan blades.
When working around exposed electrical circuits, another person who is familiar with the power-off controls should be
nearby to switch off power if necessary.
The power supply cord must include a grounded plug and must be plugged into a grounded electrical outlet.
Electrostatic discharge is generated by two objects with different electrical charges coming into contact with each
other. An electrical discharge is created to neutralize this difference, which can damage electrical components and
printed circuit boards. The following measures are generally sufficient to neutralize this difference
before
contact is
made to protect your equipment from ESD:
•
Use a grounded wrist strap designed to prevent static discharge.
•
Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use.
•
Touch a grounded metal object before removing any board from its antistatic bag.
8
10 11
9
7
12
13
14
Related Documentation
For additional information about the RDX QuikStation, refer to the following publications available from the Support section of the
Tandberg Data web site (http://www.tandbergdata.com):
• RDX QuikStation
Product Manual, Part Number 1019786
• Field Instruction: Installing the RDX QuikStation in a Rack, Part Number 1019782
RDX QuikStation™
WHAT’S IN THE BOX?
www.tandbergdata.com
TECHNICAL SUPPORT
Model No. RMN-A-05-10
Serial No.
RDX QuikStation System Components
Make a note of your Product Serial number here
Power connector
Mouse connector (green)
Keyboard connector (purple)
USB 2.0 ports (2 each)
Serial connector
VGA connector
Gigabit Ethernet ports (2 each)
8
9
10
13
1
2
3
RDX LCD panel (8 each)
RDX dock (8 each)
RDX cartridge eject button (8 each)
USB 2.0 port – used for configuration
and diagnostic purposes
LED panel – displays indicators for network,
USB connection, and system health
Emergency-eject keyhole (8 each)
Power button
4
5
12
6
3
7
11
14
1
2
3
Part No. 98900-RDX
Visit the Support section of the Tandberg Data web site (http://www.tandbergdata.com)
for the following:
• Driver, firmware, and software updates
•
Knowledge base articles
•
Troubleshooting information
•
Product documentation
•
Product warranty and registration
•
Email and phone technical support
1
2
3
4
5
6
Additional RDX Cartridges
To purchase RDX cartridges, contact your Tandberg Data Partner, or contact Sales via the Tandberg Data
web site at http://www.tandbergdata.com.
