TRACTOR CONNECTION
1. Hydraulics
Red pipe
> Supply (35-40lpm)
Blue pipe
> Return (
Free flow return!!)
2. Electrics
A. Connect 12V supply to 3pin plug
B. Connect wrapper harness to controller
ENTERING THE WORKING POSITION
1. Remove the wrap arm transport lock.
2. Position the safety arms into the working
position by removing the retaining pin.
3. Adjust the load arm stop pin to allow
clearance between the top of the bale at the
rotating arm.
4. Unfold the wrap arms and install the 2/3
rolls of film.
The quick reference guide is not a substitute for the Operators Manual!
Please refer to Operators Manual for more detailed information
B
A
3
4
1
2
S200V / S300V QUICK REFERENCE GUIDE
