MACHINE
SETUP
HITCHING THE MACHINE
Before attempting to hitch the wrapper to the tractor remove the lower links
of the tractor to avoid them touching the drawbar (1). The machine can be
hitched to the tractor using the towing hook of the tractor. Prior to hitching
to the tractor the correct height of the hitch eye (2) must be determined.
Please note that the drawbar can be turned upside down to accommodate
a high or low attachment level, height adjustment can also be achieved by
choosing one of three heights when connecting drawbar to the Chassis front
adjustment plate (3). There are three types of drawbars available with this
machine providing three hitching options depending on the tractor towing
mechanism; Standard Hitch (shown), Clevis Hitch & High Hitch. Once an
appropriate hitch height has been determined the Chassis height can be
raised and lowered by turning the handle on the jack (4) clockwise and anti-
clockwise respectively. Once the machine has been hitched to the machine
fully re-tract the jack by turning the handle clockwise.
Never stand between the tractor and the machine during hitching and
ensure both the tractor and machine are prevented from rolling away.
645
1
2
3
4
365
A100 EH Operator’s Manual
18 //
49
