Tanaka TCH24EA(50ST), Инструкция по эксплуатации

Страница: 5 / 56

English
5
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
Hedge Trimmer Displacement
It is important that you read, fully understand
before use, and observe the following safety
precautions and warnings. Careless or improper
use of the unit may cause serious or fatal injury.
Spark plug
Read, understand and follow all warnings and
instructions in this manual and on the unit.
Idle
Idling speed
Always wear eye, head and ear protectors when
using this unit.
Fuel tank capacity
Never touch the cutting blade when it is running. Dry weight (without fuel and blade case)
Choke – Run position (Open) Blade type
Choke – Start position (Closed)
L
Overall blade length
On/Start
P
Blade pitch
O ff /Stop Gear ratio
Emergency stop
L
pA, eq
ISO10517
Sound pressure level LpA by ISO 10517
Equivalent*
Fuel and oil mixture
L
WA, eq
ISO
10517
Sound power level LwA by ISO 10517
Equivalent*
Idle speed adjustment
L
WA, Ra(M)
2000/14/EC
Measured sound power level LwA by 2000/14/
EC
Racing
Priming pump
L
WA, Ra(G)
2000/14/EC
Guaranteed sound power level LwA by
2000/14/EC
Racing
Hot Surface – Contact with hot surface can
cause serious burns.
a
hv, eq(F)
Vibration level by ISO 10517
Front handle / Equivalent*
Lubrication should be applied at 20 hour
intervals and more frequent at heavy use.
a
hv, eq(R)
Vibration level by ISO 10517
Rear or Right handle / Equivalent*
Guaranteed sound power level
K
Uncertainty
00Book̲TCH24EA.indb 5 00Book̲TCH24EA.indb 5 2018/11/01 13:59:20 2018/11/01 13:59:20