4
(a)
(b)
Fig. 2. AEOLUS-SENSE should be mounted parallel to the main axes of the airplane.
1.2 Power Connection
AEOLUS-SENSE connects to a fused connection, which may be the cigarette lighter plug of the
aircraft. Always make sure to connect with the proper polarity:
•
The connections to the external DSUB25 connector are as in the below table:
•
PIN
CONNECTION
1
Main Power plus(+) (factory connected)
2
Autopilot
4
External USB(factory connected)
5
External USB(factory connected)
7
Horn red(FlySense only)
8
External LED(PRO only)
9
temperature probe blue or yellow(factory connected)
10
GND
11
External Switch(PRO only)
12
External Switch(PRO only)
13
GND
21
temperature probe black (factory connected)
22
temperature probe red (factory connected)
24
Horn Black(FlySense only)
25
Main Power Minus(-) (factory connected)
1.3 Software – EFIS TA app
AEOLUS-SENSE operates with the free EFIS TA app offered by TalosAvionics. EFIS TA app
has been tested to comply with ASTM F3153 – 15 Standard Specification for Verification of
Avionics Systems. EFIS TA app runs on smart mobile devices (tablets or smartphones) with iOS
or Android operating systems.
EFIS TA app for Android can be downloaded from
EFIS TA app for iOS can be downloaded from
EFIS TA software instructions can be downloaded from
https://www.talosavionics.com/support/
PLEASE DO READ THE EFIS TA APP SOFTWARE INSTRUCTIONS!
EFIS TA app may operate in standalone mode, when the smart mobile device is not
connected to an AEOLUS-SENSE or --preferably-- in connected mode, when the smart mobile
device is connected to an AEOLUS-SENSE .
