background image

Rotary Lawnmower Owners Manual

Safety 

Operation 

Assembly 

Maintenance

Model No. 

AM3030N/ AM3034N

Model No. AM3030N/AM3034N/AM3010KN

LAWN MOWER WARRANTY

The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of this
product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation of a State or
Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520 939)(the “Company”)
to be free from defects in material and workmanship for a period of 24 months from the date of original purchase.
The Company during the period of the warranty, will at its option, and subject to the conditions stated herein,
repair or replace without charge this product or any component part, which upon examination by an
Authorised Service Agent or by the Company is found to be defective.

W a r r a n t y   c o n d i t i o n s

This warranty will not apply:
(i)  where this product has been subjected to misuse, abuse, accident or want of care
(ii) where this product has been used for a purpose for which it was not designed or is not suited; 
(iii) where the service of this product has been undertaken by a person not authorised by the Company to
carry out such work or where parts that have not been approved by the Company have been used;  
(iv) where this product has  been used for industrial or commercial purposes

Should service become necessary during the warranty period, the purchaser should contact an Authorised Service
Agent or the Company. In order to obtain warranty service, the purchaser must present the store receipt showing
the name of the retailer and the date of purchase together with a completed Warranty Card. The period of the
warranty begins from the original date of purchase, notwithstanding any  subsequent repair or parts replacement.
No additional warranty or guarantee other than set out in this document,  whether written or verbal, is authorised
to be made on the Company's behalf. The purchaser shall be responsible for delivery or causing the product to be
delivered to the Company or the Authorised Service Agent and  the purchaser shall be responsible for all charges
in connection with re-delivery of the product and/or the delivery of parts. Damage in transit is not covered by this
warranty and purchasers should remove from the product any liquids (if applicable) before sending and pack the
product securely to prevent damage.

W a r r a n t y   e x c l u s i o n s

Normal wear parts or components are subject to separate terms as follows: Normal wear parts, components or
service required when performing normal and regular maintenance of this product are not covered by warranty
unless it is found to be defective by an Authorised Service Agent or by the Company. Normal wear parts include,
but are not limited to:

WARRANTY INFORMATION

AU

Returns based on the above listed normal wear parts will not be accepted under this warranty as they are
considered consumable items and are at the expense of the purchaser. 

1

Worn Blades.

Spark Plugs.

Carburetor Tune-ups.

Lubricants.

Engine Tune-ups.

Filters.

WARNING • PLEASE READ

For your own safety please read this manual before attempting to operate your new unit. Failure
to follow instructions can result in serious personal injury. Spend a few moments to familiarize
yourself with your mower before each use.

9096-305T01

Model No. 

AM3010KN

Содержание AM3030N













Отзывы: