TallyGenicom 9050N -, Руководство пользователя

Страница: 35 / 172

User Manual 3-9
Printing on Special Media
Basic Printing Tasks
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To print on both sides of the paper from the your Printer Properties:
1.
Select the Paper tab within your Printer Properties.
1.
Select Long-edge or Short-edge from the 2-sided printing pull-down.
2.
Verify the page orientation and select the desired tray.
3.
Click OK .
Binding Preferences
You can select how the printer will orient the page layout when duplexing. Depending on your
page orientation, duplexing on the long-edge or short-edge of the paper produces different
results. The diagram below illustrates these results.
Printing on Special Media
The printer can accommodate a variety of special media. Each media type requires some special
handling. Read the sections below for each special media type, prior to inserting the media into
the tray.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To select the special media types through your Printer Properties:
1. Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2.
Select the desired media from the Media Type pulldown and ensure that the paper source
is set to Auto or is set to a paper tray that is loaded with the required media.
3.
Click OK .
4.
Click OK .
Setting Media Types
Settings on the Operator Panel and in your Printer Properties are required for media loaded in
all trays. Media type settings must match those of the actual paper loaded in the trays.
Otherwise, image quality cannot be processed accurately. Toner may not fuse properly on the
media, resulting in dirty and poor quality printouts.
Portrait
Long-edge
Portrait
Short-edge
Landscape
Short-edge
Landscape
Long-edge