Tally Dascom DT-210 Скачать руководство пользователя страница 29

Страница: 29 / 111

Tally Dascom DT-210/230 User Guide V1.3

Important Notes on Horizontal Installation:



The printer should install at a flat and steady place. It’s recommend that install the printer at

horizontal line. The angle of inclination should not exceed ± 10°(paper feed direction) if tilt install

printer, it does not allow to tilt by other direction.



Keep printer far away from source of water.



Avoid the printer on place where it is vibration and shock.



Ensure printer ground connect is safe.



When the printer is at operation and maintenance, it is recommended to retain the enough space

to ensure the printer can work in reliability and ease of operation.

Vertical Installation

Vertical Installation Steps:

You need to perform the follow tasks to install the printer on a wall. .

Mount the plate (P/N: 99501) on the lower housing of the printer with screws.

Align the positioning holes of the hanging plate and plug into the fixed screws on the wall.

Содержание DT-210
















































































































Результаты поиска

Содержание DT-210

Отзывы:

Tally Dascom DT-210, Руководство пользователя, Страница: 29 / 111

Результаты поиска

Содержание DT-210

Отзывы: