11
POWER UNIT
Always disconnect the power unit from the electricity supply before carrying out maintenance,
repairs, servicing or cleaning. Check all electrical connections and power lead for signs of
excessive wear. The power unit can be wiped down with detergent or disinfectant solution or
wipe*. Do not use solvents. Unsuitable for sterilisation. Disposal of the pump / mattress /
cushion in accordance with the local regulations including WEEE requirements.
*
In line with the MHRA Medical Device Alert (MDA/2013/019), Talley advises customers to
use pH neutral, high level disinfectant cleaning products to sanitise reusable medical devices
to prevent damage to materials and the degradation of plastic surfaces after prolonged
use. The use of inappropriate cleaning and detergent materials on medical equipment
could damage surfaces and may compromise the ability to decontaminate medical devices
adequately or may interfere with device function. Talley recommends the use of TECcare
®
CONTROL antimicrobial wipes and fluid to clean and decontaminate all products it supplies
to health and social care facilities. TECcare
®
CONTROL products provide class leading broad
spectrum, high level disinfection with an exceptional safety profile. Being pH neutral TECcare
®
CONTROL can be universally used on all hard and soft surfaces without any detrimental
effect. TECcare
®
CONTROL is CE marked for cleaning medical equipment.
SERVICING
Once the initial guarantee period expires, Talley recommend that all power units should be
serviced annually or as indicated by the ‘hours to service’ display. The unit contains no user
serviceable parts and should only be serviced by either Talley or an authorised dealer. Talley
will make available on request service manuals, component parts lists and other information
necessary for Talley, an authorised dealer or a competent electrical engineer to repair or
service the system. Talley’s standard terms and conditions apply to all sales. A copy is
available on request. For service, maintenance and any questions regarding this, or any other
product, please contact Talley.
It is the customer’s responsibility to ensure the following prior to collection:
l
the system is cleaned of any obvious contaminants.
l
contamination status is documented.
l
assistance is given to Talley personnel to bag the equipment if the mattress has been in
a known or suspected infectious environment.
TRANSPORT AND STORAGE
Handle with care. Please report instances of damage or impact to Talley Service Department.
Transport
–25 °C without relative humidity control; and
+70 °C at a relative humidity up to 93 %, non-condensing.
An atmospheric pressure range of 700 hPa to 1 060 hPa.
Suitable for all standard modes of transport when in the correct packaging.
