
6 4
T A L K S W I T C H CO N F I G U R A T I O N
If you connect an unsupported IP phone, select
Other IP Phone
. Other IP
phones that support the G.711 codec may work with the system, but
some features may not work. As TalkSwitch cannot enable special
features, or customization of these IP phones, further configuration will
be limited to the programmable options on the phone itself.
8. Set the
Location
of the phone. Choices are:
•
Internal
- An internal IP phone is located within the office, and is
connected to the same LAN as the TalkSwitch unit.
•
External
- An external IP phone is located outside the office, and is
connected to the TalkSwitch unit via internet. The TalkSwitch unit
must have a VoIP module.
9. If you set
Location
to
External
, then select the
Time Zone
of the external
IP phone.
10. If you selected
Counterpath - Eyebeam
or
Other IP Phone
, enter the
Username
and
Password.
The default settings are user[extension number]
and pass[extension number]. These are used to manage calls between
TalkSwitch and the IP extension and must match the username and
password of the IP phone. Change only if required.
11. If you selected
TalkSwitch
,
Polycom
or
Grandstream
, enter the
MAC
Address for auto configuration of phone
. The MAC Address is printed on
the bottom of the phone or on the phone’s shipping box.
12. Select the language for prompts heard by callers in the
Prompts language
for this extension
list.
13. Select the phone numbers you want to display at the remote location
when VoIP calls are placed from this extension. If
Default VoIP number
is
selected, the phone number associated with the outgoing VoIP port is
used. This selection makes the most sense if your VoIP numbers have
been configured to handle all inbound calls the same way.
a) Select the
Phone number used for TalkSwitch VoIP Caller ID
box to set
the phone number displayed during a VoIP call between TalkSwitch
units.
b) Select the
Phone number used for Service Provider Caller ID
box to set
the phone number displayed during a VoIP call through a service
provider.