5 4
T A L K S W I T C H CO N F I G U R A T I O N
3. Select the
Activate Automatic Route Selection
check box.
4. Enter the leading digits in the
Leading Digits
box.
5. Select the
Action
. Choices are:
•
Hunt Group (n)
— Performs ARS by routing the call to the line hunt
group.
•
Block Calls
— Performs toll restriction by blocking the call.
6. If required, set up the carrier code(s).
a) If the route requires one carrier code for the whole day:
i)
Enter the carrier code in
Carrier Code 1
.
ii) Select the
All Day
check box.
b) If the route requires one carrier code for part of the day:
i)
Enter the carrier code in
Carrier Code 1
.
ii) Enter
Start Time 1
.
iii) Enter
Start Time 2
.
c) If the route requires two carrier codes, one for each part of the day:
i)
Enter the first carrier code in
Carrier Code 1
.
ii) Enter
Start Time 1
.
iii) Enter the second carrier code in
Carrier Code 2
.
iv) Enter
Start Time 2
.
