1 6 2
U S I N G T A L K S W I T C H
•
Queue Appearance
— Shows the status of a local extension call queue,
and allows you to connect with the oldest queued call. The LED will be
off if the extension has no calls queued, and flashing if the extension
has one or more calls queued. Press the key to connect with the oldest
queued call.
•
VoiceMail
— Press the key to access the voice mailbox of the local
extension. The LED is unused. If the
Voicemail
key is not programmed,
press ,
and
then
U
.
•
DND
— Press the key to toggle Do Not Disturb mode. The LED is unused.
If the
DND
key is not programmed, press
62
.
•
Intercom
— Press the key, dial an extension, and then press
U
to page
the extension in Intercom mode. The LED is unused. If the
Intercom
key
is not programmed, press
84
, dial an extension, and then press
U
.
You can only page TalkSwitch phones in Intercom mode.
•
Park
— Press the key to put the call on hold in the next available park
orbit. The system will respond with the park orbit number (500 to 509).
The LED is unused. If the
Park
key is not programmed, press
k
,
510
, and then press
U
.
•
Un-park
— While the phone is on-hook, press the key, dial the park orbit
number (500 to 509), and then press
U
to retrieve the call. The LED is
unused. If the
Unpark
key is not programmed, lift the handset, press
, dial the park orbit number, and then press
U
.
•
Pickup Any
— Press the key to answer a call ringing any extension. The
LED is unused. If the
Pickup Any
key is not programmed, press
9
,
and then press
U
.
•
Pickup Ext
— Press the key, and then dial an extension to answer a call
ringing the extension. The LED is unused. If the
Pickup Ext
key is not
programmed, press
7
, and then dial the extension.
•
Overhead page
— Press the key to page the office. The LED is unused. If
the
Overhead Page
key is not programmed, press
0
, and then press
U
.
Line appearance on a TS-480i
The following line appearance functions can be programmed on the
TalkSwitch TS-480i.
•
None
— The softkey is not programmed.