User Manual
Tal-SP09 Bluetooth speaker
Thank you for purchasing this product.
These operational guidelines are intended to help you have a smooth and
convenient user experience. Please read these instructions carefully before use.
Note:
*When charging, only use the USB charging cable supplied to charge the Bluetooth
speaker. Depending on the host device you may hear an electrical rumble noise for
a few seconds when charging begins, this is normal.
*After a long time of not using the speaker or the battery has become exhausted,
there is a slight delay of a few seconds before the indicator light shows
*The speaker requires approximately three hours to full charge but may take longer
depending on the available current from your chosen device.
* Keep 5-10cm between speaker and mouth when using the phone function.
Product description:
1. Supports all Bluetooth editions, 10 meters remote control scope, wireless
communication (consistent with the Bluetooth protocol specifications CLASS 2)
2. Built-in lithium battery: 3.7-4.2 V. You can use the USB connection on your
computer to charge, or a USB power supply of DC5V, the charger light will turn red
and when charging is completed, the red light will disappear.
3. Bluetooth version: 3.0 Bluetooth protocol : Supports A2DP and AVRCP profile.
4. Works with most Bluetooth enabled devices including Android Tablets such as
those from Sweet or iPods, iPhones, Mobile phones or computers etc.
Operation instruction:
1. Slide the power button located underneath the speaker to “on”
2. Open the Bluetooth device’s search function and find the device connection
(connection code “0000” if required). After entering the connection code, your
speaker should be ready for use and you will hear the voice announcement.
3. To play music directly from a Micro SD card ensure your files are in a generic MP3
