`TALEX Spółka z ograniczoną odpowiedzialnością
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.:
26
7.
Defects and methods of repair.
TYPE OF DEFECT
REASON
METHOD OF REPAIR
Sweeping roller does
not rotate or rotates
in the wrong
direction
Not connected or incorrectly connected
hydraulic system
Check connection
Not operated or incorrectly operated
circuit of vehicle’s hydraulic system
Include correct hydraulic circuit in the
vehicle
Damaged hydraulic system
Report to the service centre
Sweeper does not
collect the dirt
correctly
Too low rotation speed of sweeping roller Increase the engine speed
Incorrectly set pressure of the sweeping
roller
Adjust according to instruction
Too high speed driving
Adapt the speed of driving
Dirt tank is full
Empty the tank
Excessively worn brushes
Change
Rapid wear of
brushes
Incorrectly set pressure of the sweeping
roller. Incorrectly set side brush
Adjust according to instruction
Throwing dirt from
the sweeper
Too high rotation of brushes. Incorrectly
set brushes. Incorrect setting on the
vehicle
Check and adjust according to
instruction
TABLE 6.
Defects and methods of repair
9
.
Service and maintenance
9.1
After work service
After finishing work, the machine should be thoroughly cleaned and washed with a stream
of running water. When using devices generating high pressure, be careful, do not direct the stream
directly at all kinds of stickers placed on the machine and on elements such as bearings, etc. It is
recommended that the cleaning and washing of the machine take place in a car wash equipped with
a sewage treatment plant or a sedimentation tank to neutralize the resulting sewage.
