13
/
38
EN
12
/
38
Box 2:
Board
Board bag
4 x T-Nuts
4 x M6-18
(preassembled in Cruising Jet)
4 x M6-55
(preassembled in Carver Jet)
EVA strips
(with Carver Jet)
Jet ESC cover
(preassembled in Carver Jet)
4 x CHC M8-16
3. PREPARATION
3.1
3.1 Battery Charging
Battery Charging
Before using for the first time, charge the battery 100%.
Charge the battery at least once within 3 months after delivery.
The battery will reach its full capacity after 3 or 4 charging/
discharging cycles.
Check that the device and the battery connector are completely dry.
Ensure that you are in a dry place away from splashes of water.
Never operate in the water or in the presence of humidity.
Do not charge immediately after use. Charging a hot or cold battery
can damage cells. Wait 30mins to 1hr to let the battery cool down or
warm up to room temperature.
Best temperature for charging is between 15-25ºC.
Do not drop battery.
Charging a damaged battery can cause the battery to catch fire.
The pins will only connect if the notches are properly aligned. No
great force is needed.
Box 3:
Battery
