Safety information
Operating instructions
Version 1.0.0
Rotary indexer RTX
Page 9 of 35
2.3
Foreseeable misuse
Any use beyond or other than the intended use is regarded as misuse.
2.3.1
Guarantee conditions
Changes to the structure of the materials used in the machine, e.g. the drilling of additional holes, can result in
damage to the components. This is not regarded as intended use and may lead to loss of warranty or liability claims
as a consequence.
2.4
Directives, statutory provisions and standards
The following statutory provisions and standards were applied:
Machine Directive
2006/42/EG, Annex I
Low Voltage Directive
2014/35/EU
EMC Directive
2014/30/EU
Safety of machinery - basic concepts - risk assessment and risk mitigation
DIN EN ISO 12100
2.5
Technical condition of the partly completed machinery
Do not use the partly completed machinery if it is not in sound condition technically. If the partly completed
machinery is used when it is not in a sound condition technically, there is a risk of death or injury to staff and a risk of
damage to property.
2.5.1
Make no changes in the safety provisions
The manufacturer has made safety provisions. No liability will be accepted if the operator of the partly completed
machinery makes any changes in the safety provisions without express permission.
2.6
General hazards
This section lists risks associated with the partly completed machinery that remain even when it is operated
according to its intended use.
In order to reduce the risk of personal injury or damage to property, and to avoid potentially dangerous situations, the
safety information provided here and in the other sections of these Operating Instructions must be observed.
Risk of death by electrocution
DANGER
Risk of death by electrocution!
There is an immediate risk of fatal injury due to electric shock if live components are touched.
Damage to the insulation or to individual components can cause fatal injury.
Only allow work on the electrical system to be carried out by qualified electrical
engineers.
In the event of damage to the insulation, immediately shut off the power supply and
initiate a repair.
Before starting work on active parts of the electrical system or equipment, ensure that it
is completely powered down and cannot be switched on again.
Risk of injury from moving parts
WARNING
Risk of injury from moving parts!
Moving parts can cause serious injury.
Do not reach into moving parts or carry out work on moving parts while the system is in
operation.
Never open any covers while the system is in operation.
