Taktomat RT, Оригинальная инструкция по эксплуатации

Страница: 20 / 57

Original Operating Instructions
Page 20 Cylinder Cam Rotary Indexing Table RT and TT Version 1.0.3
4.3 Construction Type RT400, RT 500, RT630,
series S03
(1) Input shaft (drive)
(2) Star wheel (output)
(3) Rating plate
(4) Position indicator
(5) Housing
(6) Non rotating center column
(7) Cable aperture
4.4 Function
The drive unit drives the star wheel (2) via the input shaft (1) and the cylinder cam. The output
plane is perpendicular to the drive plane. The machine converts a uniform radial movement on
the drive side to an intermittent or uniformly reduced output movement. The accessories are
mounted on the star wheel (2). The position indicator (4) shows the current position of the cylin-
der cam. The rating plate (3) is attached to the housing. If required additional accessories are
mounted on the non rotating center column (6) (only possible on series S03). The housing (5) of
the cylinder cam rotary indexing table from type RT400 on has a cable aperture (7).