COPY
‑ 1 ‑
Feb./22/ 07
Instruction Manual for Super Cool Oil Cooler Kit
(Mount-on-Super head+R,
Oil Hose Type)
Item No.
Fits
Frame Nos
：
０９−０７−８８０１
(3-fin / Super Cool)
：
Monkey and Gorilla
：
Z50J-1300017
〜
(Models equipped with a die-cast clutch cover)
Read all instructions first before starting the installation
◎
We do not take any responsibility for any accident or damage whatsoever arising from the use of the kit not in conformity with the instructions in the
manual.
◎
We shall be held free from any responsibility or compensation whatsoever for any glitch in the parts other than ours if the glitch takes place after the
installation and use of the products.
◎
If you make modifications to any product of the kit, we shall be held free from any guarantee of the product.
◎
You are requested not to contact us about the combination of our products with other manufacturers'
.
◎
This kit is for exclusive use only in the bikes of the models and frame Nos as mentioned in the top right-hand corner of this page, but limited to bikes
fitted with a die-cast clutch cover and Super Head+R, of TAKEGAWA-make. Please note that this kit is not for use in any other models.
◎
Please order repair parts referring to Item Nos and reference Nos described in this manual. Should you have any questions about the products, please
kindly contact your local motorcycle dealer.
◎
If the hose interferes with the frame, it is advisable to wind something like a spiral tube around the hose as a protection against the interference.
・
Thank you for purchasing one of our TAKEGAWA-made products. Please strictly follow the following instructions in installing and using the kit.
・
Before installing the kit, please be sure to check the kit contents. Should you have any questions about the kit, please contact your local motorcycle
dealer.
◎
Please be informed that, mainly because of improvement in performance, design changes, and cost increase, the product specifications and
prices are subject to change without prior notice.
◎
This manual should be retained for future reference.
・
Always start the engine in a well-ventilated place, and do not turn on the engine in an airtight place.
(Otherwise, you will suffer from carbon monoxide poisoning.)
・
When you notice something abnormal with your motorcycle while riding, immediately stop riding and park your motorcyle in a safe place to
check what has gone wrong. (Otherwise, the abnormality could lead to accidents.)
・
Before doing work, make sure your motorcycle is secure on level ground for safety's sake.
(Otherwise, your motorcycle could overturn and injure you while you are working.)
・
Check or carry out maintenance of your motorcycle correctly according to the procedures in the instruction manual or service manual.
(Improper checking or maintenance could lead to accidents.)
・
If you find damaged parts when checking and performing maintenance of your motorcycle, do not use these parts any longer, and replace
them with new ones. (The continued use of these damaged parts as they are could lead to accidents.)
・
Keep plastic bags for packing the products out of children's reach, or discard them.
(If children get them on, there will be a danger of their suffocating.)
・
As gasoline is highly flammable, never place it close to fire. Make sure that nothing flammable is near the gasoline. Since vaporized accumula
tion of gasoline is at high risk of explosion, work in a well-ventilated place. (Otherwise it may cause a fire.)
The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the
following warnings.
WARNING
・
Always try to drive your motorcycle at a legal speed, abiding by the laws.
・
Work only when the engine and muffler are cool. (Otherwise, you will get burned.)
・
Do the installation with right tools. (Otherwise, breakage of parts or injuries to you may take place.)
・
Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Otherwise, these parts may get damaged or fall off, resulting in accidents.)
・
As some products and frames have sharp edges or protruding portions, please work with your hands protected.
(Otherwise, you will suffer injuries.)
・
Before riding, always check every hardware for slack in parts like screws. If you find slack ones, screw them securely up to the specified
torque. (Otherwise, improper tightening may cause parts to come off.)
・
Always use new gaskets and packings. And check those parts, to be reused, for wear and damage. If you find worn or damaged parts,
replace them with new ones.
・
Never forget to check the oil level before starting the engine. If the oil level is below the required level, add oil. Besides, change oil when time
has come to replace the oil, or when your motorcycle has already traveled the distance, specified in the instruction manual or service manual.
The following show the envisioned possibility of injuries to human bodies and property damage as a result of disregarding the
following cautions.
CAUTION