COPY
‑ 1 ‑
Oct./07/ 08
◎
The following show the envisioned possibility of injuries and damages to human bodies, and physical loss or damage as a result of disregarding the
following cautions.
◎
We shall be held free from any kind of warranty whatsoever of products other than this product if the glitch takes place on the other products than
this one after the installation and use of this product.
◎
This product is designed for exclusive use in the above-mentioned types of motorcycles and frame numbers only. Please take note that this product
cannot be mounted on other types of motorcycles.
◎
Please refrain from combined use of this kit with any other part than the specified parts.
◎
This product is designed for exclusive use in a stock kick starter arm. (In case of TAKEGAWA’s kick starter arm, the arm will interfere with the genuine
muffler guard.)
◎
This product should be used with a stock muffler protector. Or, no-installation of the protector may cause scalding. So, be sure to install the muffler
protector.
◎
This product is designed for absolute use with a genuine rear shock absorber. If other rear shock absorber is installed, please install this product with
washers so the rear shock absorber and the muffler do not interfere with each other.
D-Style Muffler Instruction Manual
Item No.
Applicable to
Frame No.
：
０４−０２−０４３１
：
DAX 50 (12V)
：
AB26-1000001
〜
Thank you for purchasing one of our TAKEGAWA’s products. Please strictly follow the following instructions in installing and using the products. Before
fitting the products, please be sure to check the contents of the kit. Should you have any questions about the products, please kindly contact your dealer.
Before installation, please read this instruction manual carefully and understand the instructions fully.
Enjoy the sound and performance of this muffler distinct from a stock muffler.
◎
Please note that, in some cases, the illustrations and photos may vary from the actual hardware.
○
This is a genuine-like up-muffler for the DAX 50, to which a genuine muffler guard can be installed.
It improves the performance without altering the original look of the DAX 50.
○
We have adopted a silencer body and exhaust pipe, both made of stainless, to improve the appearance and durability.
〜
Features
〜
Please read the following instructions before installation.
・
Always try to drive your motorcycle at a legal speed, abiding by the laws.
・
Work only when the engine and the muffler are cool. (Otherwise, you will burn yourself.)
・
Prepare right tools for the work, and do the work in the proper and right way.
(Otherwise, improper work could cause breakage of parts or injuries to yourself.)
・
Always use a torque wrench to screw bolts and nuts tight and securely to the specified torque.
(Improper torque could cause these parts to get damaged or fall off.)
・
As some products and frames have sharp-pointed or protruding portions, please work with your hands protected.
(Otherwise, you will suffer injuries.)
・
Do water washing of a muffler only when it is cool. (Otherwise, the muffler may be cracked.)
・
Park your mortorcycle in a place where pedestrians will not touch the muffler accidentally. Besides, please always be considerate enough not
to park it in the way of pedestrians or moving vehicles.
(If you park your motorcycle on the sidewalk with its muffler on the pedestrians’ side, the pedestrians may touch the muffler and get burned or
suffer property loss.)
・
Before riding, always check every section for slack in parts like screws. If you find slack ones, screw them securely up to the specified torque.
(Or improper torque may cause parts to come off.)
・
This muffler is designed for exclusive use in a stock kick starter arm. TAKEGAWA’s kick starter arm will interfere with the genuine muffler guard.
The following show the envisioned possibility of injuries and damages to human bodies, and property loss as a result of
disregarding the following cautions.
CAUTION
