background image

Model No. 

AB-LGF

Operation Manual

Takara Belmont Barber Chair

Contents

SAFETY PRECAUTIONS (MUST BE OBEYED)
NOTES FOR USE
LOCATIONS OF WARNING LABELS
NOTES RELATED TO SYNTHETIC (NATURAL) LEATHER
ACCESSORIES
NAME OF COMPONENTS
PREPARATION     

HOW TO USE

1
7
8
8
8
9

11

CARE AND MAINTENANCE
DAILY INSPECTION
BEFORE REQUESTING REPAIR
DAILY INSPECTION PROCEDURES
SPECIFICATIONS
STANDARD PERIOD OF USE
DISPOSING OF THIS PRODUCT

26
27
28
29
31
32
32

13

15

16

20

22

23

23

24

25

25

11

(1) Guiding Customers

(2) Raising/Lowering the Chair

(3) Reclining/Raising the Backrest

(4) Using Preset Functions

(5) Removable Step

(6) Heater

(7) Accumulator

(8) Dryer/Iron Holder

(9) Service Outlets

(10) Foot Cushion

Power Supply 

Takara Belmont would like to thank you 

for purchasing this Takara Belmont 

product.

Be sure to read this operation manual 

before operating the chair and always 

operate the chair properly according to the 

instructions herein.

Failure to read this operation manual may 

lead to accidents.

This product is designed for commercial 

use in barber shops and beauty salons.

Do not use this chair for any applications 

other than hairdressing/beauty-related 

procedures.

Store this operation manual in a secure 

location and refer to it whenever necessary.

Please inform Takara Belmont of the book 

number on the back cover to obtain a new 

operation manual if this operation manual 

becomes torn or damaged and unreadable, or is 

lost.

Содержание LEGEND AB-LGF





































Отзывы: