Takagi AT-KJr3U-IN, Инструкция по установке и руководство пользователя

Страница: 43 / 64

43
Page
-Additional features-
Information mode
You can get some information about the water heater's condition by pressing the "INFO" button. For
more information, follow the procedures below:
The controller has a function that can change units of temperature and flow rate from °F to °C and from
gallon per minute to liter per minute and vice versa. Please follow the procedures below:
Unit conversion mode
INFO
Button
Operation
Screen on the controller
Built-in controller Remote controller
1st. press
Inlet water temperature will be displayed on
the remote controller by pressing the "INFO"
button.
2nd. press
Outlet water temperature will be displayed on
the remote controller by pressing the "INFO"
button.
3rd. press
Water flow will be displayed on the remote
controller by pressing the
"INFO"
button.
4th. press
Press the "INFO" button to finish information
mode.
Inlet water
temperature
Outlet water
temperature
Water flow
Normal Operation
Owner's Guide
Operation
Screen on the controller
Built-in controller Remote controller
1.
Press the "ON/OFF" button on the controller in
order to turn the controller on.
2.
When ON, the orange LED is lit.
3.
The previous set temperature will be displayed on
the screen.
4.
Press the "INFO" button for at least 3 seconds.
5.
The set temperature should now be displayed in the
alternate unit of measurement.
(EX.: 100 °F)
(EX.: 38 °C)