①
Corner block x 4
②
Frame x 2
⑤
Cover x 2
⑥
Corner guard x 8
⑧
M3-8 flat head screw x 16
⑪
M3-5 original trapezoid
③
Panel support frame x 4
④
Panel
x 2
A
PORTABLE ALUMINIUM
INSTRUMENT CASE with HANDLE
AUGH series
Assembly instructions
Please read this
instructions
carefully before assembl
y
.
１．
Ensure that the ordered model and the product label on the package matches.
２．
Some parts may have unused holes or leftover screws due to the parts standardization.
３．
During assembly, ensure screw holes align perfectly. If not, loosen all screws and
re-
assemble.
Before
A
ssembl
y
Components
Recommended torque :
M3 -10 hex - 0.2N • m
M5-8 pan head self-tapping screw 1.5N • m
Other screws - 0.3 ~ 0.6N • m
B
⑥
⑧
③
⑦
④
①
②
⑤
⑩
M5-8 pan head
self-tapping screw x 4
⑩
⑨
1/2
2024
TAKACHI ELECTRONICS ENCLOSURE CO., LTD.
⑨
M3-10 hex screw x 8
⑦
Carrying handle
x
1
* Recommended torque listed is for reference only;
actual may differ. Assemble after testing torque.
Check
that the ribs on
①
corner block and the
grooves on
②
frame
are align
ed
.
Ensure the same for the opposite / bottom side.
head (hex) screw x 8
(Not applicable to some models)
Once the two
②
frames are assembled as shown in
the figure below, proceed to step
C
.
*
Align
⑦
c
arry
ing
handle to the
②
frame part with
holes
on the body, and secure with
⑩
M5-8 pan
head self-tapping screws.
Connect
①
corner blocks onto the
②
frames and
secure with
⑧
M3-8 flat head screws.
Side Panels
