TAJIMA TLMX Series, Руководство пользователя, Страница: 269 / 318

Functions concerning optional device
254
Chapter 9
RR05
(4)
To use Air compressor
3-2.
To reverse the 1st color and the 2nd color in sequin device III (Data conversion for
sequin output)
This is the setting not for replacing by removing sequin but for reversing
sequin on the design data all at once when you desire to replace sequin
of the device L1 and L2 (the right figure). This function is effective only
for the step selected with sequin needle against step of sewing sequin.
3-2-1. Explanation on the screen
YES
Left side
L1 L2 R2 R1
Right side
9 Data conversion for sequin output
L1< > L2
9 Data conversion for sequin output
R1< > R2
Folder and Design stored in the memory of the
machine
The memory of the machine means the folder and the
design stored in "Data Input (Memory)".(
→
p.68)
The device L1 (1st color) and L2 (2nd color) at the left
side will be replaced each other.
Thus, "Sequin_O" in the design data will be replaced
with "Sequin _O_2" or vice versa.
Sequin_O (Sequin output): 1st color
Sequin_O_2 (Sequin output 2): 2nd color
The 1st color (L1) and the 2nd color (L2) in the
device at the right side will be replaced each other.