TAJIMA TLMX Series, Руководство пользователя, Страница: 161 / 318

To trim thread
146
Chapter 6
RR05
2-8. To add thread trimming code to the design and trim thread (Data Edit "Insert")
This function always executes automatic thread trimming at the same position by adding thread trimming
code to the design. A stitch will be inserted before the selected stitch No. When this operation is performed
in the middle of embroidery, data set will be canceled. If the stitch having long length is inserted, a design will
be displaced hereafter.
2-8-1.
Explanation on the screen
2-8-2.
How to operate
The following example is for adding thread trimming code to 20th stitch.
(1) To open screen
(2) To select a design
The original design will be overwritten after editing. Back up design data according to
need.
1 Data Edit
Delete
1
2
3
4
5
6
7
8
9
10
0 0 Jump
8 4 Stitch
8 3 Stitch
11 5 Stitch
8 8 Stitch
1 13 Stitch
-11 2 Stitch
-12 -3 Stitch
-11 7 Stitch
-25 15 Stitch
Modify
Insert
Stitch No.
X data (Data to move the frame in horizontal)
When a value is 8, the frame travel amount is
0.8 mm.
Y data (Data to move the frame in vertical)
When a value is 4, the frame travel amount is
0.4 mm.
Function code( → p.292)
It is the code to indicate the role of the stitch.
!
CAUTION
1 Data Edit
TBF
3
******
****
***