TAJIMA TFHX Series Скачать руководство пользователя страница 77

Страница: 77 / 140

CHAPTER 7 MANUAL OPERATION

5. FRAME ORIGIN MEMORY (TEHX-C, TFHX, TFHX-C)

1. Select frame origin memory

The machine will perform frame travel auto-
matically, and memorize the origin of the
embroidery frame.
Perform this operation after the software was
installed or when the frame was moved dur-
ing turning off the power.

2. Execute

Execution of frame origin memory will
cause the frame to move automatically to
search the origin.

When the machine memorizes the origin, the
frame will return to the original position.

WARNING

When performing this operation, do not put your hands under the

needle or on the machine table. If your hands are under the needle
or on the machine table, you may be injured by the needle or the
moving frame.

(GC03)

Xa:43.2

Ya:-276.1

Screen 1400

Xa:43.2

Ya:-276.1

Screen 1400

OK?

Xa:43.2

Ya:-276.1

Содержание TFHX Series













































































































































Результаты поиска

Содержание TFHX Series

Отзывы:

TAJIMA TFHX Series, Руководство пользователя, Страница: 77 / 140

Результаты поиска

Содержание TFHX Series

Отзывы: