TAJIMA TEMX-C Series, Руководство пользователя

Страница: 58 / 242

To register a design in the memory of the machine
45
1
2
3
4
5
6
7
8
9
10
11
Chapter 4
PT10R
3-2-3.
How to operate (to use bar code reader)
The following is an example when registering a design (stored in a personal computer) into the memory of
the machine.
(1)
After connecting the LAN cable to the LAN port at the back of the operation panel, start up DG/ML by
Pulse.
(2)
Check if network setting is "YES" (p.180).
(3)
Connect the bar code reader to the USB port of the operation panel (p.19).
(4)
To set to main screen
(5)
To read bar code
Condition data (color change order) is also read automatically.
This design has become the state that it is possible to embroider (Data set is completed).
After that, proceed to "To change color automatically / to start operation automatically (Auto Color
Change "AC / Auto Start "AS") (p.53)".
Please buy a commercial item.
TAJIMA_W 14117
0
Reading of the bar code is also possible from
the following screen.
4 Data Input (USB)
5 Data Input (LAN)
A
1 Data Input (Memory)
Bar code
Bar codes can be printed by the print
function of DG/ML by Pulse.