TAJIMA TEHX-C, Руководство пользователя

Страница: 15 / 140

CHAPTER 2 MACHINE CONSTRUCTION
8
1. MAIN FUNCTIONS
EASY OPERATION
As the machine adopts touch panel type TFT color LCD and jog remote-controller
(option), easy operation is obtained.
POWER FAILURE MEASURE
It is possible to prevent the loss of products due to design displacement, etc. if power is
shut off during machine operation.
CLEAN-UP FUNCTION
It disposes fine stitch data automatically to prevent skip stitches and thread breakage.
MEMORY
The machine is equipped with about 2,000,000 stitch memory as the standard, and it is
possible to register up to 99 designs at the maximum.
TAKE-UP LEVER GUARD
It adds stability to thread movement, and prevents entangling of thread or coming-off
of thread.
ENLARGE, REDUCE AND ROTATE DESIGN
It is possible to reduce/enlarge size of embroidery design within a range of 50 to 200%
in increments of 1%. Rotation can be changed in increments of 1°.
AUTOMATIC REPEAT
It is possible to set up to 99 times at the maximum for X and Y directions individually
by inputting value for the number of repeats.
DESIGN DRAWING AT EMBROIDERING
It is possible to confirm the current embroidery position and progressing condition
with real-time display.
BUILT-IN FLOPPY DISK DRIVE
A single 2DD floppy disk can store up to 111 designs with approximately 240,000
stitches. Alternatively, a 2HD floppy disk can hold up to 223 designs with approxi-
mately 480,000 stitches.
EDIT OF DESIGN DATA
Design can be edited (modified, inserted, deleted) in 1-stitch units.
FRAME BACK
The embroidery frame can be traveled back in 1-stitch units, color change code units,
or by a designated number of stitches.
TRACE FUNCTION
The function checks if the design fits in the frame to be used before starting embroi-
dery.
AUTOMATIC UPPER/UNDER THREAD TRIMMER
It can automatically trim threads (under/upper and under) according to the design data
commands. In manual operation, it can trim threads as desired (upper/upper and
under).
THREAD TENSION SUITABLE FOR HIGH-SPEED OPERATION
Highly stable thread tension is realized by the adoption of middle thread guide with
tension spring and upper thread lock mechanism.
ROTARY TYPE THREAD BREAKAGE DETECTION MECHANISM
Stable detection of upper/under thread breakage is made possible even at high-speed
operation.
NOISE-REDUCTION DESIGN (EXCLUDING TEHX-C)
Variety of noise-reduction mechanism keeps working environment comfortable.
ORIGIN RETURN
A return to the design origin (design start position/offset start position) can be made
during embroidery operation, even if the design origin does not coincide with the
design end point.
Jog remote-controller
Design drawing at embroidering
Middle thread guide with
thread take-up spring
Rotary type thread breakage
detection mechanism
Upper thread lock mechanism
(GC02)