TAJIMA TCMX 601, Руководство пользователя

Страница: 91 / 130

10-2
Parameter (embroidery, head)
1.
Weak brake
This setting applies brake to the main shaft motor at stop of the
machine.
1.
To call the screen......................................................
2.
To set ................................................................. End
Switching the screen
Main screen ....................
Other setting • operation.
2.
Thread breakage detection
Set sensibility of thread breakage detection.
1.
To call the screen......................................................
2.
To set ................................................................. End
Switching the screen
Main screen ....................
(twice)
Other setting • operation.
Use this function when releasing the main shaft brake in such
a case as maintenance.
Start operation from the main screen.
F3
List screen List screen
2 Weak Brake
or
F3
YES
Setting range
YES: To apply brake NO: not to apply brake
YES is automatically set at start of the machine.
Example: NO
YES NO
E
A D2 F1 F6
F2
List screen List screen
7 Thread Breakage Detection (CM)
or
Press ?
F2
F2
0 10
3
7 Thread Breakage Detection (CM)
Setting range: 0 (not to detect thread breakage), 1 to 10
Sensitivity
1 10
[Sensitivity]
High Low
0
Not to detect
5
Example :5
E
A D2 F1 F6
JZ07