TAJIMA TCMX 601, Руководство пользователя

Страница: 84 / 130

To operate the machine manually
8-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
3.
D-axis origin return
This function makes the driving shaft (D-axis) that rotates sewn needle
and nipple return to the origin. At the same time, the looper will also
return to the origin.
1.
To call the screen......................................................
2.
To execute ......................................................... End
Selecting will cause the warning buzzer to sound.
Pressing [SET] will cause D-axis to return to the origin.
Switching the screen
Main screen.....................
Other setting • operation .
CAUTION
When performing this operation, do not put your hands
etc. near to needle. Since sewing needle rotates, you
could be injured.
D-axis origin
In the state that hook section of sewing needle faces to the
front
Looper origin
In the state where the threading hole (2) of the looper (1)is
positioned at the rear side. At this moment, it is possible to
perform threading from the threading hole (4) of the nee-
dle plate (3).
1
4
3
2
[Viewing from top]
Origin
3
4
1
!
F5
List screen List screen
4 D-axis Origin Return (CM)
or
Press ?
F5
Example: to execute
E
A D2 F1 F6
JZ07