Tait TP9600 Скачать руководство пользователя

Страница: 76 / 110

Emergency

appears in the display, and remains until the manual emergency call is canceled.

If you receive an acknowledgment from another radio in your group, the manual emergency call is canceled, and the
message

Emergency Acked

briefly appears in the display.

This feature is controlled by a software license (SFE) and may not be available with your radio.

Canceling a manual emergency call

If the emergency situation has been resolved, the manual emergency call can be canceled either by you or another
member of your group.

• Press and hold the emergency key until the message

Emergency canceled

appears in the display.

Your radio now returns to the channel that it was operating on prior to the emergency call.

Canceling a manual emergency call you have received

When you have received a duress emergency call, the Emergency menu always moves to the top of the menu list. In
the Emergency Menu, you can manually acknowledge the duress emergency call. This acknowledgment cancels the
call.

1. Press

Menu

and select

Emergency

Acknowledge

The name of the radio that initiated the emergency call appears in the display.

2. Press

Send

to cancel the manual emergency call from that number.

The message

Emergency ack. sent

briefly appears in the display.

Accessing Emergency Location Information

Location

appears in the display, above the left selection key, you can display the current location of the radio that

has sent a manual emergency call. The last location of the radio will still be available even if the radio is turned off and
then on again.

To access the location information, either press

Location

or use the

Last Stored

menu.

Using the Location menu

1. Press

Location

to display the current location of the radio.

2. Use the scroll keys to view more location information.

3. Press

Exit

to return to the previous display.

Tait International Ltd July 2021

Содержание TP9600















































































































Результаты поиска

Содержание TP9600

Отзывы:

Похожие инструкции для TP9600

Бренды по названию

Популярные бренды

Tait TP9600, Руководство пользователя

Результаты поиска

Содержание TP9600

Отзывы:

Похожие инструкции для TP9600

Бренды по названию

Популярные бренды