Tait TP9600 Скачать руководство пользователя страница 40

Страница: 40 / 110

Depending on how the radio is programmed, scroll keys or left selection keys may be used to select
the

Zones

menu.

2. In the

Zones

menu, scroll through the list of zones until the desired one appears.

3. Press

Select

, and the zone indication appears either below the channel information, beside the

RSSI icon, or in both positions. These can also be set to not be displayed.

Other ways of selecting a zone

The following controls may also be used to select a zone:

• 3-way selector (see

About the Radio Controls

)

If the 3-way selector is turned while pressing the PTT key, the zone will change after the PTT key is
released.

• left selection key (see

Using the left selection key Quick Access menu

)

• scroll keys (see

Using the scroll key Quick Access menu

)

• function keys to scroll through zones

Selecting a Channel

Using the Main menu:

1. Press

Menu

and select

Channels

Tait International Ltd July 2021

Содержание TP9600















































































































Результаты поиска

Содержание TP9600

Отзывы:

Бренды по названию

Популярные бренды

Tait TP9600, Руководство пользователя

Результаты поиска

Содержание TP9600

Отзывы:

Бренды по названию

Популярные бренды