Tait TP9400 Скачать руководство пользователя страница 129

Страница: 129 / 146

Troubleshooting 129

Checking the version of your radio

Your radio provider may ask you for the hardware
and firmware version of your radio, for
troubleshooting purposes.

Using the Main menu

Press

Menu

and select

Radio info

Version info

Scroll to the version information you want to view
and press

Select

Using the PTT key

■

Hold down the PTT key and turn on the radio.

The firmware and hardware versions, and your
radio’s frequency band is briefly displayed.

General care

Your radio requires no regular maintenance other than
ensuring that the battery has sufficient charge and that
no damage has occurred to the antenna or the battery.

Notice

To prevent permanent damage to the radio

case, do not allow the radio to come into contact with
detergents, alcohol, aerosol sprays, or petroleum-based
products.

For general battery care, see

“Maintaining battery life

and performance” on page 124

Cleaning the contacts of the battery

Notice

Do not scratch or scrape the contacts of the

battery. If necessary, wipe the contacts of the battery
with a dry, lint-free cloth to remove any dirt, oil or grease.

Cleaning the radio

If you need to clean the radio case, use a cloth
dampened with clean water.

Содержание TP9400



















































































































































Результаты поиска

Содержание TP9400

Отзывы:

Tait TP9400, Руководство пользователя, Страница: 129 / 146

Результаты поиска

Содержание TP9400

Отзывы: