Tait TP9400 Скачать руководство пользователя страница 125

Страница: 125 / 146

Charging and caring for batteries 125

Cleaning the contacts of the battery

Notice

Do not scratch or scrape the contacts of the

battery. If necessary, wipe the contacts of the battery
with a dry, lint-free cloth to remove any dirt, oil or grease.

Storing batteries

When not in use for a month or more, batteries should be
stored correctly to prolong their life.

■

Remove the battery from the radio before storage.

■

Fully charge the battery if storing for less than one
month.

■

Charge the battery to about 30% if storing for longer
than one month.

■

Store the battery in a cool dry place.

Using batteries after storage

Batteries that have been stored for any length of time
must be charged before being used. See

“Charging the

battery” on page 122

Disposing of batteries

Run the battery flat before disposing of it. When
disposing of the battery, be sure to do so in an
environmentally sensitive manner. Please contact your
radio provider for information on recycling programs in
your area. See

“Environmental responsibilities” on

page 9

for more information.

Содержание TP9400



















































































































































Результаты поиска

Содержание TP9400

Отзывы:

Tait TP9400, Руководство пользователя, Страница: 125 / 146

Результаты поиска

Содержание TP9400

Отзывы: