Tait TP9310 Скачать руководство пользователя страница 58 | Manualshive

Страница: 58 / 80

Tait TP9310 Скачать руководство пользователя страница 58

58 Charging and caring for batteries

Before using the charger

Check the battery label and charger label to see if the
charger is compatible with the battery. See also

"About the chargers" on page 57

.

Warning

Handle the battery safely. Failure to

observe the following handling recommendations
could result in personal injury and/or equipment
damage.

■

Before using a Li-ion battery, read the Li-ion Bat-
tery Safety Information (MPC-00006-xx) included
with your battery, and follow the instructions it pro-
vides. Incorrect use of a Li-ion battery can cause
explosion or fire.

■

Do not short-circuit the battery contacts, neither
intentionally nor accidentally, e.g. by placing the
battery with conductive materials such as keys or
jewelry inside a pocket or container. Short-circuit-
ing the battery contacts can heat up the conduc-
tive material.

■

Do not obstruct the vent hole(s) on the battery.
If the vent on the battery is obstructed the battery
may explode, causing personal injury and/or
equipment damage. If the vent on the radio is
obstructed, audio quality and/or key function may
deteriorate and radio seals may be damaged.

Notice

Turn the radio off before removing the battery,

and turn it on again after attaching the battery. This
ensures that the radio powers down and up correctly.
Failing to follow this procedure may require the radio
to be turned off then on again to operate correctly.

«
...
56
57
58
59
60
...
»

Содержание TP9310

















































































Отзывы:

Нет отзывов