Tait TP9100 Series P25 Скачать руководство пользователя страница 147

Страница: 147 / 168

Troubleshooting 147

Troubleshooting the charger

The table below describes what to do if the orange
(right) LED on the battery charger is either flashing
or glowing.

Charger

orange LED

Meaning

Possible reason(s)

and solution

Flashing

Fault

■

The battery is not compatible with
the charger. Use only Tait chargers
and batteries. See

"Checking com-

patibility" on page 148

■

The charger firmware is not com-
patible with the battery type.
See

"Checking the firmware version

of your charger" on page 148

■

There is insufficient voltage to the
charger. Check you are using the
correct power adaptor.

■

The battery may be deeply dis-
charged (less than 3 V). Disconnect
the battery from the radio and
charge the battery.

■

The battery may be faulty. Consult
your radio provider for advice.

■

If all orange LEDs are flashing on
the multicharger, the charger itself
may be faulty (e.g. the fan may be
jammed or faulty). Consult your
radio provider for advice.

Glowing

Charging

suspended

The battery is either too hot or too cold.
Charging will start or resume once the
temperature is within normal limits. No
action is required by you.

Содержание TP9100 Series P25









































































































































































Результаты поиска

Содержание TP9100 Series P25

Отзывы:

Tait TP9100 Series P25, Руководство пользователя, Страница: 147 / 168

Результаты поиска

Содержание TP9100 Series P25

Отзывы: