Tait TP9100 Series P25 Скачать руководство пользователя страница 135

Страница: 135 / 168

Charging and caring for batteries 135

You should recharge or replace the battery as soon
as possible. When the battery is completely empty,
the message

Battery is flat

appears on the display.

The radio emits a long, low-pitched beep and then
stops working. Turn off the radio immediately.

Notice

Do not allow a radio battery to fully discharge

every time you use it, or you will shorten the service
life of the battery.

Charging the battery

Notice

If you are charging a battery for the first time,

follow the instructions on

page 27

Desktop charger—connect the charger to the
correct Tait power adaptor.

Multicharger and vehicle charger—power on the
charger.

Initially, all three LEDs are lit for two seconds.

Place just a battery in the charger, or a radio with
a battery attached. There is no need to remove a
belt clip, antenna, or any accessory that is
attached to the accessory connector.

Notice

For best charging performance, switch off the

radio before placing it in the charger.

Содержание TP9100 Series P25









































































































































































Результаты поиска

Содержание TP9100 Series P25

Отзывы:

Tait TP9100 Series P25, Руководство пользователя, Страница: 135 / 168

Результаты поиска

Содержание TP9100 Series P25

Отзывы: