© Tait Limited May 2012
www.taitradio.com
402-00079-00
TMAA03-09/TMAA03-12 Plinth Installation Kit
Installation Instructions
Introduction
The TMAA03-09 plinth installation kit (for 25W radios) and the TMAA03-12 plinth
installation kit (for 30–50W radios) are used for desktop installation of mobile radios.
The plinth can be placed on the desk or on the TMAA13 power supply.
The plinth installation kits are
supplied with an 8 foot (2.5m)
power cable, four thumb screws to
attach the mobile radio and a
microphone clip (with screws and
washers).
The connector plug on the power
cable differs for 25W and 30–
50W mobile radios. Ensure that
you have the plinth installation kit
that is appropriate for your radio.
Installation
Mounting the microphone clip
The microphone clip can be mounted on
either side of the plinth, allowing for left-
handed or right-handed use.
■
Mount the microphone clip to the side of
the plinth with the supplied screws and
washers.
power cable
4 thumb screws
plinth
microphone clip
3 screws
3 washers
microphone clip
mounting holes
microphone clip
