TM9400 Specifications Manual
Transmitter Specifications
17
© Tait Limited
November 2016
3
Transmitter Specifications
This chapter compares the performance of the transmitter in a TM9400
radio with transmitter requirements specified by ETSI and TIA.
Where an ANSI/TIA or ETSI EN 300 113 test method was used to measure
TM9400 performance, this is indicated in parentheses. Where the ETSI test
method EN 300 086-1 was used, no test method is named. Please see also
the footnotes to the tables.
This equipment is compatible with the emissions listed in the following
table.
Notice
Some emission designators may not apply in all regions. Not
all models support all emission designators. Contact your regional Tait
office for details.
Notice
The TM9400 specifications in this manual are typical perfor-
mance figures that are intended only to provide guidance. They are sub-
ject to change without notice and shall not form part of any contract. To
establish whether the radio meets the regulatory requirements that apply
to you, please contact your regional Tait office.
For important information about how radio performance figures were
derived, see
Emission
Designator
Common Name
Modulation
Scheme
Operating Modes
11K0F3E
analog voice
analog FM
NB voice
16K0F3E
analog voice
analog FM
WB voice
6K60F2D
FFSK data
FFSK
NB data - 1200 bps
7K80F2D
FFSK data
FFSK
NB data - 2400 bps
9K60F2D
FFSK data
FFSK
WB data - 1200 bps
10K8F2D
FFSK data
FFSK
WB data - 2400 bps
8K10F1E
P25 Phase 1
C4FM
digital voice
8K10F1D
P25 Phase 1
C4FM
data/control channel
8K10F7W
P25 Phase 1
C4FM
digital voice/data/
control channel
8K10F1W
P25 Phase 2
H-CPM
digital voice /data
