Tait TM9315, Руководство пользователя

Страница: 38 / 62

38 Operating in conventional mode
To turn monitor on and off:
■
Press the function key programmed to turn moni-
tor on and off.
While monitor is on, the green LED flashes slowly.
Your radio may be programmed so that monitor
turns off automatically after a short time.
To turn squelch on and off:
Squelch is often programmed as a long
keypress of the same function key that turns
monitor on and off.
1 Long press the monitor function key to override
both squelch and the signalling mutes.
This allows you to hear even faint and noisy
signals. While squelch override is on, the green
LED flashes slowly.
2 Press the monitor function key again to return the
radio to a quiet state.
Squelch cannot be overridden when the radio is
scanning.
Bypassing the repeater
(on analog channels)
For analog channels, you can bypass the radio
repeater and communicate directly with another radio.
This feature is known as repeater talkaround. You can
do this, for example, when you are out of range of the
repeater, or if the repeater is busy or stops working.
While repeater talkaround is active, all transmissions
are made on the receive frequency of the channel you
are on.
To activate repeater talkaround:
1 Select the required channel.
2 Press the programmed function key to turn
repeater talkaround on.