TM8260 Installation and Programming Guide
Programming a Dual-Radio System
45
© Tait Limited
October 2014
4.7
Troubleshooting
If reporting the configuration shows only two devices when three are
expected, or the Select Device(s) dialog does not appear when reading or
programming the radio system:
■
Make sure all cables are connected correctly, and securely.
■
Make sure power is applied to both radio bodies.
■
One or more devices may not have the correct system configuration table
of NTIDs. Re-download the table to all devices in the system. See
“Downloading Configurations” on page 17
.
If a “Duplicate NTIDs” message appears on the radio display, you must
uninstall the radio to a single-head single-body system and use the
programming application’s multiple device configuration utility to change
the NTIDs (click Tools > Download and then Device Configuration >
Advanced). For more information, see
“Downloading Configurations” on
.
If an “incorrect band” message appears when attempting to program a radio
body, the band of the selected device to program is different to the band
selected in the programming application. Either change the
Band
field on
the Specifications form, or select the matching radio body in the Select
Device(s) dialog.
If an “unlicensed feature” message appears in the programming application,
or the LEDs on one or both radio bodies flash on and off when powering
up the system, optional features (for example, Multi-Body Support) may not
be enabled. For more information, see
“Checking the Required Firmware
